PACKAGING
MATERIAL FOR PACKAGING
Application:
Al / Al alloy | Temper | Thickness [mm] | Proposed application |
EN AW- 1050A
EN AW- 3003
EN AW- 3005 EN AW- 8006 EN AW- 8011A |
according to customer requirements | 0.060 ÷ 0.120 | Containers for food industry |
EN AW- 3005 | O | 0.070 | Aluminum molds for t-light |
EN AW- 3105 EN AW- 8011A |
according to customer requirements | 0.19 ÷ 0.30 | Sheets and strips of aluminum and aluminum alloy for the caps production |
Chemical composition*:
Al / Al alloy | Si [%] | Fe [%] | Cu [%] | Mn [%] | Mg [%] | Zn [%] | Al [%] |
EN AW-1050A | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.07 | min 99.50 |
EN AW-3003 | 0.6 | 0.7 | 0.20 | 1.0-1.5 | - | 0.10 | rest |
EN AW-3005 | 0.6 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | 0.10 | rest |
EN AW-3105 | 0.6 | 0.7 | 0.30 | 0.30- 0.8 | 0.20-0.8 | 0.10 | rest |
EN AW-8006 | 0.40 | 1.2-2.0 | 0.30 | 0.30-1.0 | 0.10 | 0.10 | rest |
EN AW-8011A | 0.40-0.8 | 0.50-1.0 | 0.10 | 0.10 | 0.10 | 0.10 | rest |
* It is possible to modify alloys after previous agreement of technical requirements
Al / Al alloy | Containers |
EN AW-1050A EN AW-3003 EN AW-3005 EN AW-8006 EN AW-8011A |
Aluminum containers are disposable packaging - lightweight, rigid, perfectly protect food against deformation. Food products in containers of aluminum can be baked, freezed, stored and served for consumption. |
Al alloy | Aluminum molds for t-light |
EN AW- 3005 | This alloy provides very good plastic properties allowing easy forming and required mechanical properties and heat resistance in the process of wax pouring |
Al alloy | Sheets and strips for the caps production |
EN AW- 3105 EN AW- 8011A |
Alloys covered with a layer of titanium phosphate facilitate lacquerring layers coating. The material used for caps production |